Wellan 2000 For Industry

Introducing Wellan 2000® for the Oil and Gas Industry — an eco-friendly, chemical-free solution that prevents limescale, rust, and corrosion. Enhance equipment performance and longevity with easy installation and sustainable water treatment, designed for the toughest environments.

Problems

1. Crystallization and deposition of paraffin waxes on production pipes and pumping systems during production.
2. Clogging of conveyor pipes and flow lines with asphaltene.
3. High Viscosity for heavy oil.
4. Pipe corrosion and microbiofilm.
5. High wear and tear on equipment and drills.

Solutions

1. Paraffin wax becomes smoother.
2. Air pockets are eliminated.
3. Drills wear out more slowly.
4. No pipe corrosion, no biofilm.
5. Viscosity is significantly improved.
6. Cleaning intervals for the oil pump filter cylinders and pump heads are reduced.

INSTALLATION

Actual Applications

Results

Graph showing actual results at Con Edison of New York (Utility) after the installation of Wellan Rings at several locations (North & South Side) .Wellan Rings started to de-scale the system after installation as there was a rise in scale and rust accumulation in their strainers

Photo: Graph obtained courtesy of Con Edison of New York.

Before Wellan Ring Installation

After Wellan Ring Installation

The actual results of oxidation on strainer from Brooklyn Children’s Museum showing a strainer before and after installation of wellan Rings. The results are just after 4 weeks of installation.

The Effect

Before

After

Drag

Before

After

Drag

Before

After

Drag

Before

After

Drag

Before

After

Drag

Iron Precipitation Ground Water Case

Before: Heat exchanger clogged after almost a years operation

After: after 11 months of operation No trace of Iron precipitation

At a School in LI using ground water with high concentration of iron. Precipitation a severe problem was solved.

Corrosion and Oxidation

Is caused by water molecules breaking up due to the turbulence of the water, vortexing of water.

Compounds of water molecules and hydrogen bridges disintegrates!

Oxygen atoms turns into free radicals and form compounds with the metals of the piping.

The result: the water becomes aggressive.

BONDING TO METAL (PIPING)

Corrosion Flow:

• corrosion
• degradation of the zinc coating in iron pipes
• release of heavy metals

Corrosion Flow with WELLAN:

• formation of ferric oxide
• Fey04 / magnetite stopping corrosion

Oxidation Flow:

• oxidation
• dispersion of copper ions into water
• formation of copper carbonates/ copper oxide (verdigris)

Oxidation Flow with WELLAN:

• Neutralization of verdigris/ oxidation stop

Composition of the water harness

Degree of Hardness

1. Rang 1 from 1-7 degrees
2. Range 2 from 7-14 degrees
3. Range 3 from 14-21 degrees
4. Range 4 from 21-28 degrees
5. Range 5 from 28-35 degrees
6. Range 6 from 35-42 degrees
7. Range 7 from 42-49 degrees

Left Hand side images show deposition of rust before installation of Wellan 2000 Bio-Single Ring.

Right Hand side image shows Rust deposition getting cleared after installation of Wellan 2000 Bio-Signal Ring.

EFFECTIVENESS OF WELLAN 2000 BIO-SIGNAL DEVICE

Meghani Organics Limited (Gujrat) suffered from problems in VAM (Vapour Absorbing Machine), cooling tower for scale and algae. Before picture is after 24 hours of sulphamic acid 200kg treatment. The after picture shows results of Wellan Ring installation after 4 months without chemical treatment.

Before

After

Drag

Reputed Housing project situated at Talast/Vadoadara (IGBC - Platinum Certified). It has a common bore well for all the Bungalows in it , and due to high TDS society faces a sever problem of Rust , Scale and bio-fouling.

Before

After

Drag

As can be deduced from above Pictures, scale from the tank disintegrated & no further deposition. The Bectaslyde showed ZERO
Total Bacteria Count (T BC) just after 1 month of installation.

The Coil Tube Boiler

Before Wellan

After 3 months with Wellan

After 6 months with Wellan

After 12 months with Wellan

A step ahead!

WELLAN® 2000 simplified effectiveness test

This picture shows one of many practical examples of before and after installation of a WELLAN® 2000 Ring. The pipe on the right shows the result after just 4 weeks of use.
The lime crystals are loosened by the natural oscillations of the WELLAN® 2000 Ring and the dissolved lime is carried away with the flowing water.
The oxidation process is stopped and existing rust is changed into Fe304. The practical test was conducted by Mr. Paul Dietrich in Gundelsheim, Germany and certified by a notary.

The proof

Take a section of calcified pipe and place it into a container with water that has been treated with WELLAN® 2000. Lime and rust begin to dissolve within a very short

amount of time. Large and small particles begin to settle on the bottom of the container.

WELLAN® 2000 facts

The two-piece WELLAN® 2000 Ring is easily installed by hand in a matter of minutes. There are no installation, service, maintenance or follow-up costs.

The effectiveness period of WELLAN® 2000 is nearly unlimited the Institute for Applied Bioenergetics offers a IQ-year minimum guarantee on materials, function and effectiveness. All vital minerals remain in the water.

The pH value of the water is not affected and the water will not become aggressive — the pipes are preserved without having a layer of lime.

There are many devices available on the market for protecting and restoring water pipes.

Some of the clear advantages of WELLAN® 2000

It has no negative impact on the environment, does not result in follow up costs after the initial investment, works in both standing water and running water, removes lime and rust in a non-aggressive way and dramatically improves drinking water quality.

(Expert evaluation reports and references available for viewing)

Wellan® 2000

A new functional principle revolutionises conventional water treatment.